The only formula you need
The waist of a circle skirt is an arc of a circle, so the number you cut from is a radius:
waist seam radius = waist ÷ (2π × fraction)
Two things confuse people here. The fraction is the share of a full circle the skirt uses — 1 for full, 0.75 for three-quarter, 0.5 for half, 0.25 for quarter. And the waist in that formula is the finished waist opening, which is your body waist plus wearing ease for a closure, or the widened pull-on opening for elastic.
From that one radius, everything else is addition and subtraction:
- waist cutting radius = waist seam radius − waist allowance
- finished hem radius = waist seam radius + skirt length
- hem cutting radius = finished hem radius + total hem turn-in
- hem circumference = 2π × fraction × finished hem radius
The last line carries the fraction for the same reason the waist formula does: half a circle covers half the arc. It also uses the finished hem radius rather than the cutting radius, because the finished line is the edge you hem — the turn-in beyond it is folded away, so counting it would overstate the hem you sew.
A worked example in centimetres
Waist 70 cm, finished length 56 cm, full circle, 1 cm waist allowance, 4 cm total hem turn-in:
| Step | Calculation | Result |
|---|---|---|
| Waist seam radius | 70 ÷ (2π × 1) | 11.1 cm |
| Waist cutting radius | 11.1 − 1 | 10.1 cm |
| Finished hem radius | 11.1 + 56 | 67.1 cm |
| Hem cutting radius | 67.1 + 4 | 71.1 cm |
| Hem circumference | 2π × 1 × 67.1 | 422 cm |
The same waist in a half circle skirt: 70 ÷ (2π × 0.5) = 22.3 cm, exactly double. That is not a coincidence — the arc has to span the same 70 cm around your body using only half a circle, so the radius has to be twice as large. The hem goes the other way: 2π × 0.5 × (22.3 + 56) ≈ 246 cm, against 422 cm for the full circle, because a bigger radius with half the arc still adds up to less edge to finish.
Waist-to-radius chart
Radii rounded to one decimal. Use the finished waist opening, not your bare body measurement, if you are adding ease or elastic.
| Waist | Full (360°) | Three-quarter (270°) | Half (180°) | Quarter (90°) |
|---|---|---|---|---|
| 60 cm | 9.5 | 12.7 | 19.1 | 38.2 |
| 70 cm | 11.1 | 14.9 | 22.3 | 44.6 |
| 80 cm | 12.7 | 17.0 | 25.5 | 50.9 |
| 28 in | 4.5 | 5.9 | 8.9 | 17.8 |
| 30 in | 4.8 | 6.4 | 9.5 | 19.1 |
| 32 in | 5.1 | 6.8 | 10.2 | 20.4 |
The double circle skirt
A double circle skirt is two full circles sharing one waistband. Each panel covers half your waist, so each panel's radius is half the full-circle radius — that is, waist ÷ 4π, not waist ÷ 2π. Cutting two full circles at the full-circle radius would give you a waist opening twice the size you need.
It is worth knowing that the fabric does not exactly double. Two panels nest more tightly than two separate skirts would, so the real amount is usually about 1.7 to 1.9 times the single circle. The calculator reports what the layout actually needs; if you prefer a safety margin when ordering, buy double.
The one-eighth circle
A 1/8 circle uses a fraction of 0.125, which gives a very large radius for the same waist — a 70 cm waist needs about 89 cm. It is a flat, barely-there curve rather than a circle, and it is usually drafted on folded paper in a corner rather than from a single centre point. It is not one of the four shapes the calculator steps through, but the formula is the same one with 0.125 in place of the fraction.
Waistband and opening allowances
If you are adding a separate waistband, base the radius on a waist of body waist + 2 × seam allowance + overlap. A 2 cm seam allowance and a 3 cm underlap on a 70 cm waist turns into a 77 cm opening, and the radius grows with it. A waistband of width zero in the calculator means no separate band, which is what an elastic casing normally does.
Rounding, ease and cloth
Round fabric amounts up, never down. A length cut short by 5 cm is a wasted purchase, while 5 cm spare is a scrap. If your fabric has a directional print, a nap or a one-way stretch, check the panel layout before you cut: panels alternate by 180 degrees, so a directional print will run upside down on every other panel.
When the arithmetic is done, the calculator runs the same numbers and adds the panel layout and fabric length, the hemming guide covers the bias drop that changes the hem after cutting, and the closure guide explains what a zip or elastic does to the waist opening.
Ask about your own skirt